Scrape-applied two-component road marking paint
This coating is a long-lasting wear-resistant marking material made of GR-S501 imported active acrylic resin, high-quality composite pigments and fillers, and various functional additives through a special process. Due to the construction method of two-component scraping marking, especially its linear appearance, which is similar to the commonly used hot-melt marking in China, and the strong adhesion of glass beads on the surface of the marking, the initial reflective effect of the marking is good and relatively long-lasting, which has been widely used in China in recent years.
Main base materials
Methyl methacrylate (PMMA)
Shelf life
one year
Specific gravity
1.99g/cm²
Solid content
>94 %
Coating thickness
1.2-2mm. The amount of flat line coating used is 4.5-6kg/m ² [depending on different road conditions and actual coating thickness]
Storage requirements
Keep away from heat sources, open flames, ventilation, and dryness. Store coatings and curing agents separately
Product features
High gloss and color retention, strong weather resistance, high toughness, wear resistance and cracking resistance, easy construction, resistant to low temperature of -25 ° C to high temperature of 60 ° C, with high adhesion strength when applied with special primer, not easy to peel off
Service Hotline： 400-615-8161
Scrape-applied two-component road marking paint
This coating is a long-lasting wear-resistant marking material made of GR-S501 imported active acrylic resin, high-quality composite pigments and fillers, and various functional additives through a special process. Due to the construction method of two-component scraping marking, especially its linear appearance, which is similar to the commonly used hot-melt marking in China, and the strong adhesion of glass beads on the surface of the marking, the initial reflective effect of the marking is good and relatively long-lasting, which has been widely used in China in recent years.
Main base materials
Shelf life
Specific gravity
Solid content
Coating thickness
Storage requirements
Product features
Beautiful lines and long-lasting reflectivity
This coating uses imported active acrylic resin, with a linear appearance consistent with hot-melt markings. The glass beads are firmly bonded, and the initial reflective effect is good and relatively long-lasting. It is widely used in China; Combining high gloss and color retention, weather resistance and wear resistance, and adaptability to high and low temperatures, it is a practical choice for long-term wear-resistant marking materials with convenient construction
Long term wear-resistant
The Tiantu scraping type two-component marking coating is made of imported active acrylic resin and high-quality composite pigments and fillers. After curing, the coating is tightly bonded to the road surface, with excellent wear resistance and long service life
Good and long-lasting reflective effect
The glass beads scattered on the surface of the marking line are firmly bonded with the coating through chemical cross-linking, making the marking line have good initial reflective performance, and the reflective durability is better than that of ordinary hot-melt marking line
Strong weather resistance, adaptable to a wide temperature range
The coating has high gloss and color retention, high toughness, strong weather resistance, and can maintain stability in the temperature range of -25 ° C to 60 ° C. It also has good crack resistance
Convenient construction and strong adhesion
The construction method is similar to traditional hot-melt marking, and the operation is convenient; High adhesion strength to the road surface, not easily detached
Environmentally friendly and pollution-free
The construction process does not require heating, and the solvents in the coating fully participate in chemical reactions, with no VOC emissions, meeting environmental protection requirements. Note: This type of marking material has a large usage per square meter, high material cost, needs to be cleaned, high construction cost, and may have limitations in long-term use such as difficulty in restoring reflective performance after attenuation, surface glass bead breakage or contamination, and difficulty in removing old lines. It needs to be selected and used according to specific application scenarios.
Online Consultation
Fill out the online form to receive detailed responses from our professional consultants
Introduction
Advantages
Related Products
Consult
